HSG engineering cylinder Sold to Slovenia

This article mainly introduces:

Slovenia hydraulic cylinder,HSG engineering cylinder manufacturer,HSG engineering cylinder

(Slovenia HSG engineering cylinder,produced by Hengyu Hydraulic Co., Ltd）

HSG engineering cylinder are widely used in Slovenia，because of long service life，smooth movement，high work efficiency.So our company has designed HSG engineering cylinder for customers from Slovenia.

Introduction to HSG engineering cylinder:

In order to ensure the service life of the HSG engineering cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the HSG engineering cylinder, causing damage to the seal and causing leakage in the HSG engineering cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

When purchasing the HSG engineering cylinder, try to clarify the following parameters of the HSG engineering cylinder: A. HSG engineering cylinder diameter, rod diameter, stroke; B. Working pressure or HSG engineering cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right HSG engineering cylinder type can be found accurately and quickly.

The commonly used buffer structure of the HSG engineering cylinder is composed of a piston boss and a HSG engineering cylinder head groove. When the piston moves close to the HSG engineering cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

If air enters the hydraulic system, the HSG engineering cylinder will not operate normally, mainly because there is a leak in the system. At this time, check the liquid level of the hydraulic tank, the seals and fittings on the oil suction side of the hydraulic pump, and whether the oil suction filter is too dirty. If so, the hydraulic oil should be replenished, seals and fittings should be treated, and the coarse filter element should be cleaned or replaced.

Answers to some questions about HSG engineering cylinder:

Slide weight 35 kg exit stroke 55mm, is it suitable to use 40 cylinder diameter cylinder?
The maximum output force of the 40-bore hydraulic cylinder can reach 2 tons, and whether it can be used depends on the use scenario. In addition, the problem of mechanism stuck has nothing to do with the size of the power source, and reasonable structural design and good machining and assembly accuracy are the key.

What are the functions of hydraulic cylinders?
Hydraulic cylinder is a hydraulic actuator, the specific role depends on the installation occasion and the type of hydraulic cylinder. Hydraulic cylinder is mainly used in machinery, and it is the most important component of construction machinery. It is important core component which mainly provide power for machinery.