plunger type cylinder Sold to Spain

This article mainly introduces:

Spain hydraulic cylinder,plunger type cylinder manufacturer,plunger type cylinder

(Spain plunger type cylinder,produced by Hengyu Hydraulic Co., Ltd）

plunger type cylinder are widely used in Spain，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed plunger type cylinder for customers from Spain.

Introduction to plunger type cylinder:

The plunger type cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the plunger type cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the plunger type cylinder wall due to the stiffness and the weight of the parts, causing scars.

In order to ensure the service life of the plunger type cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the plunger type cylinder, causing damage to the seal and causing leakage in the plunger type cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

When the plunger type cylinder wear is serious, you can try to use an alloy scraper to shave grooves with a depth of more than 1mm on the surface of the slip injury, then clean the grooves with acetone, apply the adjusted TS311 anti-wear repair agent on the polished surface with the plunger type cylinder inner diameter copying plate, and scrape it flat vigorously to ensure compaction and higher than the inner surface of the plunger type cylinder. After curing, polish to leave a finishing margin. Finally, the overall size, shape tolerance and roughness of the plunger type cylinder can meet the requirements by grinding. However, the life and reliability of this repair plunger type cylinder are not high.

When using the plunger type cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the plunger type cylinder block. If the plunger type cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the plunger type cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the plunger type cylinder, so that the working efficiency of the plunger type cylinder is reduced.

Answers to some questions about plunger type cylinder:

How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.

What is hydraulic cylinder guide?
The cylinder itself can not move, the piston moves, the guide should be used to guide the mechanism connected with the piston extension end. For example, in the commonly used hydraulic press, the guide column above is used to guide the pressure plate connected with the piston.