self-locking hydraulic cylinder Sold to UAE

This article mainly introduces:

UAE hydraulic cylinder,self-locking hydraulic cylinder manufacturer,self-locking hydraulic cylinder

(UAE self-locking hydraulic cylinder,produced by Hengyu Group）

self-locking hydraulic cylinder are widely used in UAE，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed self-locking hydraulic cylinder for customers from UAE.

Introduction to self-locking hydraulic cylinder:

The internal leakage of the self-locking hydraulic cylinder is an important indicator to measure the quality of the self-locking hydraulic cylinder: the internal leakage of the self-locking hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the self-locking hydraulic cylinder, so that the self-locking hydraulic cylinder can not accurately and stably stop in a certain position of the self-locking hydraulic cylinder, so it is one of the main indicators of the self-locking hydraulic cylinder.

self-locking hydraulic cylinders in series, parallel and series parallel. Series: In the self-locking hydraulic cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Series: In the self-locking hydraulic cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Parallel: the pressure oil in the self-locking hydraulic cylinder is connected with the inlet oil of each reversing valve, and the return oil is collected by the return oil circuit. Series parallel: For this one, compared with the simple series and parallel, it is slightly more complicated, but it is not impossible to understand. The series refers to the oil in the self-locking hydraulic cylinder, which is in series form, but can not form a series circuit, and the parallel refers to the oil return circuit of each valve, which is in parallel.

The material of the sliding part of the self-locking hydraulic cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

self-locking hydraulic cylinder buffer valve inspection and maintenance: For the valve buffer self-locking hydraulic cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

Answers to some questions about self-locking hydraulic cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

Cylinder la-50-70st What does that mean?
Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.