grate cooling hydraulic cylinder Sold to Britain

This article mainly introduces:

Britain hydraulic cylinder,grate cooling hydraulic cylinder manufacturer,grate cooling hydraulic cylinder

(Britain grate cooling hydraulic cylinder,produced by Hengyu Group）

grate cooling hydraulic cylinder are widely used in Britain，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed grate cooling hydraulic cylinder for customers from Britain.

Introduction to grate cooling hydraulic cylinder:

Piston grate cooling hydraulic cylinder is widely used in hydraulic transmission. When the grate cooling hydraulic cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the grate cooling hydraulic cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the grate cooling hydraulic cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

Disassembly grate cooling hydraulic cylinder: When disassembly grate cooling hydraulic cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the grate cooling hydraulic cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the grate cooling hydraulic cylinder.

grate cooling hydraulic cylinder abnormal sound, hysteresis phenomenon cause and elimination method: the piston rod is extended with abnormal sound and hysteresis, if the grate cooling hydraulic cylinder is placed for a period of time, the grate cooling hydraulic cylinder may enter the air, and the movement can be normal after dozens of repeated movements. If it still cannot be eliminated, check whether the load is aligned with the axis of the piston rod; Retracted piston rod installation helps to align the load with the piston rod. If the flow is unstable, it will also lead to abnormal movement of the piston rod. Check the relevant components of the hydraulic system.

The difference between the plunger grate cooling hydraulic cylinder and the piston grate cooling hydraulic cylinder is that the piston in the grate cooling hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type grate cooling hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

Answers to some questions about grate cooling hydraulic cylinder:

What is the valve on the hydraulic cylinder?
Oil valve, relief valve, overload valve, explosion-proof valve, etc., these are very convenient to insert! The oil valve, the overload valve and the blasting valve are very important for larger cylinders. Manufacturers will not offer you the selection. You need to choose the values by yourself according to your system, pump, cylinder, environment, working conditions and other comprehensive consideration!

How to distinguish loader boom and forearm hydraulic cylinder? Is it the upper arm or the lower arm?
The one in the middle that can flip the bucket is the small arm cylinder you say, and the one that lifts the brackets (big arms) on both sides is the big arm cylinder.