vehicle hydraulic cylinder Sold to Uganda

This article mainly introduces:

Uganda hydraulic cylinder,vehicle hydraulic cylinder manufacturer,vehicle hydraulic cylinder

(Uganda vehicle hydraulic cylinder,produced by Hengyu Group）

vehicle hydraulic cylinder are widely used in Uganda，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed vehicle hydraulic cylinder for customers from Uganda.

Introduction to vehicle hydraulic cylinder:

The main role of the vehicle hydraulic cylinder: the vehicle hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the vehicle hydraulic cylinder realizes reciprocating motion. The structure of the vehicle hydraulic cylinder has three categories: piston vehicle hydraulic cylinder, plunger vehicle hydraulic cylinder, swing vehicle hydraulic cylinder, piston vehicle hydraulic cylinder and plunger vehicle hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing vehicle hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the vehicle hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The vehicle hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

When the vehicle hydraulic cylinder thrust is insufficient, check the hydraulic circuit for leaks. Including leakage of valves and hydraulic lines. The inspection method is to check and eliminate the leakage of the hydraulic connection line by manipulating the reversing valve. Also consider the relief valve. If the relief valve enters the dirt and jams the spool, so that the relief valve is normally open, the hydraulic oil will flow directly back to the tank through the relief valve bypass, resulting in no oil in the vehicle hydraulic cylinder. If the load is too large, although the regulating pressure of the relief valve has reached the maximum rating, the vehicle hydraulic cylinder still cannot get the thrust required for continuous action without action. If the regulating pressure is low, the pressure is insufficient to achieve the required vertebra force, which is manifested as insufficient thrust. Check and adjust the relief valve at this time.

vehicle hydraulic cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the vehicle hydraulic cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

When the vehicle hydraulic cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the vehicle hydraulic cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about vehicle hydraulic cylinder:

What adhesive should be used when the cylinder is cracked?
There is a kind of cast iron glue, industrial products market can buy, A, B formula, that is, a tube is A, a tube is B, when used proportionally prepared, check the instructions. Polish the glue after it dries, and then grind it again.

What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.