rolling mill cylinder Sold to Bahrain

This article mainly introduces:

Bahrain hydraulic cylinder,rolling mill cylinder manufacturer,rolling mill cylinder

(Bahrain rolling mill cylinder,produced by Hebei Hengyu company）

rolling mill cylinder are widely used in Bahrain，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed rolling mill cylinder for customers from Bahrain.

Introduction to rolling mill cylinder:

In the case of serious wear on the inner surface of the rolling mill cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the rolling mill cylinder manufacturing process for replacement. The rolling mill cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.

Piston rolling mill cylinder is widely used in hydraulic transmission. When the rolling mill cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the rolling mill cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the rolling mill cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

When the rolling mill cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the rolling mill cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

The definition of the minimum starting pressure of the rolling mill cylinder refers to the minimum working pressure of the rolling mill cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the rolling mill cylinder parts and the size of the sealing friction.

Answers to some questions about rolling mill cylinder:

What are the standard cylinder models for hydraulic cylinders?
National standard GB/T2348-1993 specifies the hydraulic cylinder inner diameter series, you can check GB/T2348-1993 relevant regulations.

What are the four cylinders of the truck crane?
The four cylinders of the truck crane generally refer to the telescopic cylinder of the boom (to adjust the length of the boom), the variable amplitude cylinder of the boom (to adjust the elevation Angle of the boom), the horizontal telescopic cylinder of the support leg and the vertical cylinder of the support leg.