stroke adjustable cylinder Sold to Cote d 'Ivoire

This article mainly introduces:

Cote d 'Ivoire hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

(Cote d 'Ivoire stroke adjustable cylinder,produced by Hebei Hengyu company）

stroke adjustable cylinder are widely used in Cote d 'Ivoire，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed stroke adjustable cylinder for customers from Cote d 'Ivoire.

Introduction to stroke adjustable cylinder:

The body of the stroke adjustable cylinder on the processing process requirements: the body of the stroke adjustable cylinder is an important and essential part of the stroke adjustable cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the stroke adjustable cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

The material, shape and compression of the stroke adjustable cylinder seal have a great impact on the service life and work efficiency of the stroke adjustable cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

The quality of the stroke adjustable cylinder can not be ignored in the purchase of the stroke adjustable cylinder. The stroke adjustable cylinder is the main component of the stroke adjustable cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. stroke adjustable cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of stroke adjustable cylinder is deep hole processing, which has always troubled the processing personnel.

stroke adjustable cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the stroke adjustable cylinder head itself is the guide sleeve of the piston rod, the stroke adjustable cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the stroke adjustable cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.

Answers to some questions about stroke adjustable cylinder:

What is the main maintenance of the cylinder?
After disassembling the cylinder: 1, clean the cylinder and piston; 2, replace all seals; 3, if there is a valve to repair, to ensure sealing and flexible; 4, deal with all deformation parts; 5. Installation experiment.

What is a differential cylinder?
The differential cylinder is by connecting the return oil of the rod cavity through the pipeline, allowing them to flow into the rodless cavity, thereby speeding up the extension speed of the piston rod. In fact, the cylinder is still the cylinder, but the oil circuit is related to the connection. The oil connection mode in which both chambers of a single rod hydraulic cylinder are fed hydraulic oil is called differential connection.