200 ton hydraulic cylinder Sold to Chile

This article mainly introduces:

Chile hydraulic cylinder,200 ton hydraulic cylinder manufacturer,200 ton hydraulic cylinder

(Chile 200 ton hydraulic cylinder,produced by Hengyu Group）

200 ton hydraulic cylinder are widely used in Chile，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed 200 ton hydraulic cylinder for customers from Chile.

Introduction to 200 ton hydraulic cylinder:

The material of the sliding part of the 200 ton hydraulic cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

200 ton hydraulic cylinder installation precautions: Before installing the 200 ton hydraulic cylinder into the system, the parameters on the 200 ton hydraulic cylinder label should be compared with the parameters when ordering. The base of the 200 ton hydraulic cylinder must have sufficient stiffness, otherwise the 200 ton hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

The daily inspection of the 200 ton hydraulic cylinder includes: checking the connection of the 200 ton hydraulic cylinder and the pipe joint for leaks. Check the 200 ton hydraulic cylinder rod for leaks. Check the 200 ton hydraulic cylinder connection for leaks. When the 200 ton hydraulic cylinder moves, the work is normal and smooth. Whether the 200 ton hydraulic cylinder has internal leakage.

The definition of the minimum stable speed refers to the minimum movement speed of the 200 ton hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the 200 ton hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.

Answers to some questions about 200 ton hydraulic cylinder:

Cylinder la-50-70st What does that mean?
Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.

What are the main technical parameters of the hydraulic cylinder?
Parameters are as follows: 1, cylinder diameter, inner diameter size; 2, import and export diameter and thread parameters; 3, piston rod diameter; 4, cylinder pressure, cylinder working pressure, calculation is often used test pressure, less than 16MPa multiplied by 1.5, higher than 16MPa multiplied by 1.25. 5, cylinder stroke; 6. Is there a buffer? According to the working conditions, the piston rod extension contraction is generally buffered if the impact is large. 7, the installation of the cylinder.