300 tons hydrauli ccylinder Sold to S.Africa

This article mainly introduces:

S.Africa hydraulic cylinder,300 tons hydrauli ccylinder manufacturer,300 tons hydrauli ccylinder

(S.Africa 300 tons hydrauli ccylinder,produced by Hengyu Hydraulic Cylinder Factory）

300 tons hydrauli ccylinder are widely used in S.Africa，because of smooth movement，high work efficiency，clever hydraulic energy conversion.So our company has designed 300 tons hydrauli ccylinder for customers from S.Africa.

Introduction to 300 tons hydrauli ccylinder:

In order to ensure the service life of the 300 tons hydrauli ccylinder, the hydraulic system must be set up effective filtration to prevent pollution, the cleanliness of the oil should meet the ISO4406 standard, and the quality of the filtration should also meet the corresponding standards in ISO. The grade requirements of the filter are performed according to the actual working conditions of the system, but the minimum requirements are not less than 19/15 in ISO4406, that is, 24μ (β10≥75) in ISO4572.

The body of the 300 tons hydrauli ccylinder on the processing process requirements: the body of the 300 tons hydrauli ccylinder is an important and essential part of the 300 tons hydrauli ccylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the 300 tons hydrauli ccylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

The daily inspection of the 300 tons hydrauli ccylinder includes: checking the connection of the 300 tons hydrauli ccylinder and the pipe joint for leaks. Check the 300 tons hydrauli ccylinder rod for leaks. Check the 300 tons hydrauli ccylinder connection for leaks. When the 300 tons hydrauli ccylinder moves, the work is normal and smooth. Whether the 300 tons hydrauli ccylinder has internal leakage.

The scar on the sliding surface of the 300 tons hydrauli ccylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the 300 tons hydrauli ccylinder wall. Therefore, before installation, these scars must be fully repaired.

Answers to some questions about 300 tons hydrauli ccylinder:

What hydraulic valve is used to control a cylinder back and forth?
Direction valve is available. Direction valve includes electromagnetic directional valve, manual directional valve, check valve, hydraulic control check valve, the specific choice of which direction valve, you need to see the use of conditions.

What is a differential cylinder?
The differential cylinder is by connecting the return oil of the rod cavity through the pipeline, allowing them to flow into the rodless cavity, thereby speeding up the extension speed of the piston rod. In fact, the cylinder is still the cylinder, but the oil circuit is related to the connection. The oil connection mode in which both chambers of a single rod hydraulic cylinder are fed hydraulic oil is called differential connection.