single rack cylinder Sold to Kuwait

This article mainly introduces:

Kuwait hydraulic cylinder,single rack cylinder manufacturer,single rack cylinder

(Kuwait single rack cylinder,produced by Hebei Hengyu company）

single rack cylinder are widely used in Kuwait，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed single rack cylinder for customers from Kuwait.

Introduction to single rack cylinder:

single rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

Factors that should be considered when selecting the oil seal in the single rack cylinder: some specific factors should be taken into account when selecting the oil seal in the single rack cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: single rack cylinder diameter, piston rod diameter, piston rod and piston groove size, single rack cylinder working pressure, single rack cylinder movement speed, hydraulic system oil temperature and single rack cylinder working environment.

Before the single rack cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.

The main role of the single rack cylinder: the single rack cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the single rack cylinder realizes reciprocating motion. The structure of the single rack cylinder has three categories: piston single rack cylinder, plunger single rack cylinder, swing single rack cylinder, piston single rack cylinder and plunger single rack cylinder to achieve reciprocating linear motion, output speed and thrust, swing single rack cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the single rack cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The single rack cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about single rack cylinder:

How to distinguish cylinder rod head and cylinder bottom?
One end of the piston rod can be telescopic is the rod head, and the one behind is the bottom of the cylinder, which is the single rod cylinder.

What is the safety factor of 25MPa cylinder wall thickness?
Safety factor n can take 3 cylinder material allowable stress [s]=sb/n δ/D=0.08 ~ 0.3 cylinder wall thickness δ=PMAX*D/ (2.3[s]-3PMAX) δ/D≤0.08 cylinder wall thickness δ=PMAX*D/2[s] P < 16MPa, Pmax=1.5Pn; P > 16MPa, Pmax=1.25Pn cold-drawn tube or honing tube is better!