High quality hydraulic equipment manufacturers!
TELL:+8613184968882

double rod cylinder Sold to Tanzania

Release time:2023-11-14 08:41:08 Hits: Current position: Home > News

This article mainly introduces:

Tanzania hydraulic cylinder,double rod cylinder manufacturer,double rod cylinder

Tanzania double rod cylinder

(Tanzania double rod cylinder,produced by Hengyu Hydraulic Co., Ltd)

double rod cylinder are widely used in Tanzania,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed double rod cylinder for customers from Tanzania.

Introduction to double rod cylinder:

The viscosity of the working oil used in the double rod cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

The quality of the double rod cylinder can not be ignored in the purchase of the double rod cylinder. The double rod cylinder is the main component of the double rod cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. double rod cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of double rod cylinder is deep hole processing, which has always troubled the processing personnel.

The body of the double rod cylinder on the processing process requirements: the body of the double rod cylinder is an important and essential part of the double rod cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the double rod cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

The double rod cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the double rod cylinder should pay attention to: the operation should be as far away from the double rod cylinder as possible, to avoid falling objects, knocking, rubbing the double rod cylinder coating. When cleaning the double rod cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the double rod cylinder when the oil temperature exceeds 70 ° C.

Answers to some questions about double rod cylinder:

How to select swing cylinder? Under what conditions are they designed and selected?
1, determine the system parameters: ① the weight and the required force; ② Nominal working pressure and range; ③ The time required to travel this distance; 4 oil medium 2, installation method: select the appropriate way for the specific application 3, cylinder diameter and working pressure: determine the cylinder diameter and provide the necessary force required by the system pressure 4, piston rod: determine the minimum piston rod diameter required to withstand the longitudinal bending force, select the appropriate piston rod end and piston rod end thread 5, piston: Whether the seal type is suitable for the application 6, buffer: choose the buffer requirements as appropriate.

What is the principle of electric cylinder?
Principle: The electric cylinder converts the rotating motion of the motor into the linear motion of the push rod through the mechanical movement of the lead screw and the lead screw pair. With the closed-loop control characteristic of servo motor, the precise control of thrust, speed and position can be realized easily. Using modern motion control technology, numerical control technology and bus (network) technology, the program and bus (network) control is realized. Because of its easy control and use, it will realize the precision motion control that the cylinder and hydraulic cylinder drive can not achieve. Electric cylinder application field: 1, coordinate manipulator: logistics transmission, automated production line. 2. Wave making machine. 3, parallel mechanism: experimental platform, simulation platform, antenna. 4. Parallel machine tools. 5. Medical equipment: CT, Kamar

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP