Release time：2023-11-14 08:41:09 Hits： Current position: Home > News
This article mainly introduces:
Puerto Rico hydraulic cylinder,stainless steel cylinder manufacturer,stainless steel cylinder
(Puerto Rico stainless steel cylinder,produced by Hebei Hengyu company）
stainless steel cylinder are widely used in Puerto Rico，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed stainless steel cylinder for customers from Puerto Rico.
The "O" ring can be used as an auxiliary seal inside the stainless steel cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the stainless steel cylinder, and can be completely sealed.
The stainless steel cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.
When the stainless steel cylinder is in use, ensure that the stainless steel cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.
The stainless steel cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the stainless steel cylinder should pay attention to: the operation should be as far away from the stainless steel cylinder as possible, to avoid falling objects, knocking, rubbing the stainless steel cylinder coating. When cleaning the stainless steel cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the stainless steel cylinder when the oil temperature exceeds 70 ° C.
How to calculate hydraulic cylinder flow?
Effective area of the cylinder x stroke = volume usually in liters. Volume/estimated total travel time (converted to minutes) = oil flow rate.
What is the pressure provided for a 63-bore cylinder with a pressure of 2 mpa?
2 mpa pressure is equivalent to 20 kg per square centimeter, 6.3 cm straight longitude, 3.15 cm radius, square, multiplied by, calculated an area of about 31.5 square centimeters, multiplied by 20 kg, the pressure is about 630 kg.
Add Wechat