lift cylinder of forklift truck Sold to Panama

This article mainly introduces:

Panama hydraulic cylinder,lift cylinder of forklift truck manufacturer,lift cylinder of forklift truck

(Panama lift cylinder of forklift truck,produced by Hebei Hengyu company）

lift cylinder of forklift truck are widely used in Panama，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed lift cylinder of forklift truck for customers from Panama.

Introduction to lift cylinder of forklift truck:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

lift cylinder of forklift truck buffer valve inspection and maintenance: For the valve buffer lift cylinder of forklift truck, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

When using the lift cylinder of forklift truck product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the lift cylinder of forklift truck block. If the lift cylinder of forklift truck block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the lift cylinder of forklift truck, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the lift cylinder of forklift truck, so that the working efficiency of the lift cylinder of forklift truck is reduced.

The pressure of the sliding surface of the lift cylinder of forklift truck piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the lift cylinder of forklift truck must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

Answers to some questions about lift cylinder of forklift truck:

When the hydraulic cylinder changes from fast to slow, how can the slow speed become more even and the speed can be adjusted?
Reversing valve set 2 reversing valves. The back of one valve goes directly to the cylinder, running at full speed for fast action. Add a speed control valve behind the other valve, and then connect to the cylinder to achieve slow action, you can adjust the opening of the speed control valve, to achieve the speed of the cylinder can be adjusted. An import speed control valve to more than 1,000 yuan, if you think it is too expensive, you can also use the throttle valve instead. However, the throttle valve is greatly affected by the load change.

Is there a way to make the cylinder stop pushing when it hits something hard during the process of pushing?
The simplest solution is to press the stop switch, this switch has a mechanical type, touch the object on the action or send a stop signal, through the operation of the motor control cylinder; There is also an induction switch, that is, when the hydraulic cylinder expands to the range of the induction switch can sense the signal, it sends a signal to let the motor act, resulting in the corresponding action of the cylinder.