tailboard balance cylinder Sold to Portugal

This article mainly introduces:

Portugal hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

(Portugal tailboard balance cylinder,produced by Hebei Hengyu company）

tailboard balance cylinder are widely used in Portugal，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed tailboard balance cylinder for customers from Portugal.

Introduction to tailboard balance cylinder:

At the rated pressure, the thrust of the tailboard balance cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the tailboard balance cylinder is related to the diameter of the tailboard balance cylinder, but not to the stroke of the tailboard balance cylinder. Moreover, the larger the tailboard balance cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the tailboard balance cylinder.

The tailboard balance cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

The machining accuracy of the tailboard balance cylinder depends on the level of equipment, production technology and testing means. tailboard balance cylinder processing methods are commonly used in two ways, one is rough boring - fine boring - rolling, generally with 45# seamless steel pipe, this method of processing quality is good, but the cost is high. Another method is to use 20# cold-drawn seamless steel pipe, and then honing, the cost is lower. The piston rod must be adjusted and straightened before processing, and the coating thickness of the piston rod is generally not less than 0.03mm. The piston must be machined in strict accordance with the groove size and tolerance requirements given in the seal manual.

The main role of the tailboard balance cylinder: the tailboard balance cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the tailboard balance cylinder realizes reciprocating motion. The structure of the tailboard balance cylinder has three categories: piston tailboard balance cylinder, plunger tailboard balance cylinder, swing tailboard balance cylinder, piston tailboard balance cylinder and plunger tailboard balance cylinder to achieve reciprocating linear motion, output speed and thrust, swing tailboard balance cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the tailboard balance cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The tailboard balance cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about tailboard balance cylinder:

In a hydraulic system, a hydraulic pump has many hydraulic cylinders and hydraulic motors, and these executive components do not coordinate their actions with each other.
A load-sensitive variable pump can be used if these components sometimes need to work simultaneously and the power required is large. The required flow is distributed by the multi-way reversing valve, and the required flow and pressure changes are automatically adjusted by the hydraulic pump. Pressure reducing valves can be used for particularly low pressure circuits. Because you execute more components, the use of quantitative pump will cause a waste of energy, the system heat is large, not suitable.

CNC lathe rotary cylinder oil leakage and treatment methods
Oil leakage often occurs when the cylinder (especially the hollow cylinder) of the CNC lathe is installed. First check the cylinder yaw, be sure to reach or close to the required value, generally the cylinder requires the outer beat within 1 wire. Otherwise, too much beating is sure to leak oil. Then check whether the tubing is smoothly downward at a certain Angle, and can not bend. Look at the pipe outlet can not go into the oil level, to a little higher. Otherwise, there's back pressure and it's gonna leak.