hydraulic steering cylinder Sold to Spain

This article mainly introduces:

Spain hydraulic cylinder,hydraulic steering cylinder manufacturer,hydraulic steering cylinder

(Spain hydraulic steering cylinder,produced by Hengyu Group）

hydraulic steering cylinder are widely used in Spain，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed hydraulic steering cylinder for customers from Spain.

Introduction to hydraulic steering cylinder:

hydraulic steering cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

The definition of the minimum stable speed refers to the minimum movement speed of the hydraulic steering cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the hydraulic steering cylinder that undertakes different work has different requirements for the minimum stable speed.

The hydraulic steering cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the hydraulic steering cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the hydraulic steering cylinder wall due to the stiffness and the weight of the parts, causing scars.

The main role of the hydraulic steering cylinder: the hydraulic steering cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the hydraulic steering cylinder realizes reciprocating motion. The structure of the hydraulic steering cylinder has three categories: piston hydraulic steering cylinder, plunger hydraulic steering cylinder, swing hydraulic steering cylinder, piston hydraulic steering cylinder and plunger hydraulic steering cylinder to achieve reciprocating linear motion, output speed and thrust, swing hydraulic steering cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the hydraulic steering cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The hydraulic steering cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about hydraulic steering cylinder:

What is the problem that the cylinder stroke is not in place?
1. Mechanical cause: the piston rod bends; If there is a synchronous cylinder, the stroke of the two cylinders may be different. 2. Hydraulic reason: the system back pressure is too large; The actuator load increases while the system pressure decreases. The electric is not sent, the reversing valve is not reset or stuck, the oil is too dirty, there is gas in the system, the external inertia load is too large, and the cylinder stroke is not in place.

Are hydraulic cylinders divided into oil cylinders and water cylinders? What's the difference between the two types?
There are oil cylinders and water cylinders. The two cylinders are used in different environments. Oil cylinders are generally used in places where there is less demand for media, which is our most common hydraulic cylinders. Water cylinders are mainly used for large tonnage presses. Because the equipment is too large, the use of hydraulic oil will cause a relatively large waste. However, water is not pure water, there are oil-in-water emulsion and water-in-oil emulsion. Water has another benefit: it's flame retardant. It is especially suitable for some flammable and explosive occasions. Or with water glycol. The use of pure water is very little, mainly because the seal is not good and easy to rust.