Release time：2023-11-17 13:21:20 Hits： Current position: Home > News
This article mainly introduces:
Nepal hydraulic cylinder,vehicle hydraulic cylinder manufacturer,vehicle hydraulic cylinder
(Nepal vehicle hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）
vehicle hydraulic cylinder are widely used in Nepal，because of high work efficiency，no need for deceleration device，excellent fatigue and impact resistance.So our company has designed vehicle hydraulic cylinder for customers from Nepal.
The piston rod of the vehicle hydraulic cylinder has two kinds of solid rod and hollow rod, and one end of the hollow piston rod needs to be set aside for welding and heat treatment. The solid piston rod material is 35, 45 steel, and the hollow piston rod material is 35, 45 seamless steel pipe. After rough machining, the piston rod is conditioned to 229~285HB in India, and if necessary, the hardness is 45~55HRC after high-frequency quenching.
When the vehicle hydraulic cylinder is repaired, its inner and outer diameter and roundness should be accurately measured. If the inner hole of the vehicle hydraulic cylinder is badly worn, it can be repaired by grinding the mandrel or honing on the boring machine. If the piston is worn, it can be repaired by electroplating, and serious wear should be replaced.
The material, shape and compression of the vehicle hydraulic cylinder seal have a great impact on the service life and work efficiency of the vehicle hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.
vehicle hydraulic cylinder and hydraulic station selection: Select the type and structure of the vehicle hydraulic cylinder according to the operation requirements of the main engine. According to the external load force borne by the vehicle hydraulic cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the vehicle hydraulic cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the vehicle hydraulic cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the vehicle hydraulic cylinder, the diameter of the piston and the piston rod.
What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.
How to make 4 cylinders balance lifting weight at the same time?
The cost of the synchronous valve is lower, 4 cylinders need 3 synchronous valves, to be precise you can use a synchronous motor, but it is more expensive. There is another way, that is to install a throttle valve in each cylinder, respectively adjust the speed of the cylinder.
Add Wechat