300 tons hydrauli ccylinder Sold to Thailand

This article mainly introduces:

Thailand hydraulic cylinder,300 tons hydrauli ccylinder manufacturer,300 tons hydrauli ccylinder

(Thailand 300 tons hydrauli ccylinder,produced by Hengyu Hydraulic Cylinder Factory）

300 tons hydrauli ccylinder are widely used in Thailand，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed 300 tons hydrauli ccylinder for customers from Thailand.

Introduction to 300 tons hydrauli ccylinder:

The 300 tons hydrauli ccylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

When the 300 tons hydrauli ccylinder is kept, do not pay attention to keeping the oil port open, which will produce the condition of accepting foreign bodies at all times, which is absolutely not allowed. Storage must be filled with anti-rust oil or working oil, and plug.

When the long-stroke 300 tons hydrauli ccylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in 300 tons hydrauli ccylinder head seal damage, oil leakage, and piston sleep in the 300 tons hydrauli ccylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the 300 tons hydrauli ccylinder; The piston and the piston rod are connected with a spherical joint.

How the cavitation of the 300 tons hydrauli ccylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the 300 tons hydrauli ccylinder, resulting in corrosive damage to the parts.

Answers to some questions about 300 tons hydrauli ccylinder:

Why is there noise in the hydraulic cylinder of the excavator lift arm?
There is no noise of a normal cylinder, check whether the throttle is ringing, or the mechanical part connected with it is ringing, and the mechanical part can be greased. If it can't be ruled out, disconnect the cylinder from the mechanical part and act alone to see what the situation is.

What is the meaning of cylinder ejection on the injection mold, and what is the difference between cylinder ejection and ordinary ejection?
Usually requires the front die ejection will use the cylinder to drive the thimble plate to achieve the ejection of the thimble. There is also a case that the mold is very large or long, and the balance of the ejector rod of the injection molding machine is not enough, and the cylinder ejector will also be used.