hinge shaft cylinder Sold to Egypt

This article mainly introduces:

Egypt hydraulic cylinder,hinge shaft cylinder manufacturer,hinge shaft cylinder

(Egypt hinge shaft cylinder,produced by Hengyu Hydraulic Cylinder Factory）

hinge shaft cylinder are widely used in Egypt，because of excellent fatigue and impact resistance，smooth movement，high work efficiency.So our company has designed hinge shaft cylinder for customers from Egypt.

Introduction to hinge shaft cylinder:

In recent years, the processing process of the hinge shaft cylinder generally adopts the rolling method, which is a pressure finishing processing, which uses the cold plastic characteristics of the metal at room temperature, and uses the rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces plastic flow, and fills in the low concave trough of the original residue, and the roughness value of the workpiece surface is reduced. Due to the plastic deformation of the rolled surface metal, the surface tissue is cold hardened and the grain is fine, forming a dense fiber, and forming a residual stress layer, and the hardness and strength are increased, thus improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a plastic machining method without cutting.

Regular maintenance of the hinge shaft cylinder includes: regular tightening, hinge shaft cylinder fastening screws and gland screws, hinge shaft cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the hinge shaft cylinder once a year. Clean regularly, the hinge shaft cylinder is cleaned every other year, and the seals are replaced while cleaning.

When the hinge shaft cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the hinge shaft cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

The hinge shaft cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

Answers to some questions about hinge shaft cylinder:

What components can control cylinder rising and falling speed and the speed is adjustable?
A throttle or special solenoid valve is required. The reversing valve can choose the three-position reversing valve with P-type middle function. When rising, the reversing valve can be changed to the middle position to achieve differential connection and the fastest speed. Add a combination valve one-way throttle valve in the oil return circuit, connection mode: when the cylinder rises, the oil flows back to the tank through the check valve, the throttle valve is reversed off, when the cylinder falls, the reversing valve is changed to the left or right position (see the structure of the valve), the check valve is reversed off, the oil returns to the tank through the throttle valve, and the speed can be adjusted through the throttle valve.

How to exhaust hydraulic cylinder?
Exhaust: The hydraulic system generally does not have exhaust, the use of the tank can exhaust, the oil operation will bring the gas back to the tank, and the tank can be communicated with the atmosphere. The gas will escape from the oil.