pushing cylinder Sold to Belgium

This article mainly introduces:

Belgium hydraulic cylinder,pushing cylinder manufacturer,pushing cylinder

(Belgium pushing cylinder,produced by Hengyu Hydraulic Co., Ltd）

pushing cylinder are widely used in Belgium，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed pushing cylinder for customers from Belgium.

Introduction to pushing cylinder:

The pushing cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the pushing cylinder, bite. Elimination method: When installing the pushing cylinder, ensure that the axis position of the pushing cylinder is consistent with the direction of movement; Make the load borne by the pushing cylinder as far as possible through the pushing cylinder axis, to avoid the phenomenon of eccentricity.

When the pushing cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the pushing cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil pushing cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical pushing cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the pushing cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

The coordination of the sliding parts of the pushing cylinder itself should not be too tight, the sealing friction force should not be too large, and H8 / f8 coordination should be selected between the piston rod and the guide sleeve; Check whether the size of the sealing ring is processed strictly according to the standard; If the V-shaped sealing ring is used, the sealing friction should be adjusted to a moderate degree.

The internal leakage of the pushing cylinder is an important indicator to measure the quality of the pushing cylinder: the internal leakage of the pushing cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the pushing cylinder, so that the pushing cylinder can not accurately and stably stop in a certain position of the pushing cylinder, so it is one of the main indicators of the pushing cylinder.

Answers to some questions about pushing cylinder:

What are the functions of hydraulic cylinders?
Hydraulic cylinder is a hydraulic actuator, the specific role depends on the installation occasion and the type of hydraulic cylinder. Hydraulic cylinder is mainly used in machinery, and it is the most important component of construction machinery. It is important core component which mainly provide power for machinery.

What are the main technical parameters of the hydraulic cylinder?
Parameters are as follows: 1, cylinder diameter, inner diameter size; 2, import and export diameter and thread parameters; 3, piston rod diameter; 4, cylinder pressure, cylinder working pressure, calculation is often used test pressure, less than 16MPa multiplied by 1.5, higher than 16MPa multiplied by 1.25. 5, cylinder stroke; 6. Is there a buffer? According to the working conditions, the piston rod extension contraction is generally buffered if the impact is large. 7, the installation of the cylinder.