tilting furnace hydraulic cylinder Sold to Panama

This article mainly introduces:

Panama hydraulic cylinder,tilting furnace hydraulic cylinder manufacturer,tilting furnace hydraulic cylinder

(Panama tilting furnace hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

tilting furnace hydraulic cylinder are widely used in Panama，because of no transmission clearance，clever hydraulic energy conversion，no need for deceleration device.So our company has designed tilting furnace hydraulic cylinder for customers from Panama.

Introduction to tilting furnace hydraulic cylinder:

When the long-stroke tilting furnace hydraulic cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in tilting furnace hydraulic cylinder head seal damage, oil leakage, and piston sleep in the tilting furnace hydraulic cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the tilting furnace hydraulic cylinder; The piston and the piston rod are connected with a spherical joint.

The tilting furnace hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

The internal leakage of the tilting furnace hydraulic cylinder is an important indicator to measure the quality of the tilting furnace hydraulic cylinder: the internal leakage of the tilting furnace hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the tilting furnace hydraulic cylinder, so that the tilting furnace hydraulic cylinder can not accurately and stably stop in a certain position of the tilting furnace hydraulic cylinder, so it is one of the main indicators of the tilting furnace hydraulic cylinder.

When the control pressure of the hydraulic system is too low, the tilting furnace hydraulic cylinder will appear wrong or no action, because the throttle resistance in the control pipeline may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is interfered with. At this time, check the control pressure source to ensure that the pressure is adjusted to the specified value of the system.

Answers to some questions about tilting furnace hydraulic cylinder:

There are four cylinders in the front top of the dump truck. When the second cylinder is lifted to half the height, it suddenly falls back more than 30 cm or so, and the cylinder continues to lift.
The problem is the cylinder, the second section of the different strength of the heart. When the oil supply resistance is small, the first out, when the power is not moving, the cylinder needs to be strong, because the second section needs to pop it out after a while when the pressure is large, the oil can not keep up, so it falls back, and the oil continues to keep up.

How to calculate the cylinder diameter, rod diameter and pressure of the cylinder, and how to output tonnage?
Hydraulic cylinder output force F=PAX10^3(KN) F is the output force (KN), P working pressure (MPa), A is the piston or plunger area of action.