steering cylinder Sold to Greece

This article mainly introduces:

Greece hydraulic cylinder,steering cylinder manufacturer,steering cylinder

(Greece steering cylinder,produced by Hengyu Hydraulic Cylinder Factory）

steering cylinder are widely used in Greece，because of no need for deceleration device，long service life，smooth movement.So our company has designed steering cylinder for customers from Greece.

Introduction to steering cylinder:

steering cylinder body inspection: The inner surface of the steering cylinder and the piston seal are the main factors causing the leakage in the steering cylinder, if the steering cylinder has a longitudinal tensile mark, even if the new piston seal is replaced, it can not effectively eliminate the fault, the inner surface of the steering cylinder mainly checks whether the dimensional tolerance and shape and position tolerance meet the technical requirements, there is no longitudinal tensile mark, and measures the depth of the longitudinal tensile mark, in order to take the corresponding solution.

When purchasing the steering cylinder, try to clarify the following parameters of the steering cylinder: A. steering cylinder diameter, rod diameter, stroke; B. Working pressure or steering cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right steering cylinder type can be found accurately and quickly.

Protection of the steering cylinder surface: During the dismantling process, safety protection should be carried out on the steering cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the steering cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the steering cylinder should be cleaned up in time.

Regular maintenance of the steering cylinder includes: regular tightening, steering cylinder fastening screws and gland screws, steering cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the steering cylinder once a year. Clean regularly, the steering cylinder is cleaned every other year, and the seals are replaced while cleaning.

Answers to some questions about steering cylinder:

How to control the speed of the cylinder?
High demand control, it is necessary to use servo closed-loop control, you can adjust the speed at will. Reference: Hydrodynamic Motion Control Practical Design Guide.

What does cylinder speed ratio mean?
The speed ratio of the cylinder is the ratio of the reciprocating speed of the piston, equal to the ratio of the rodless cavity area to the roded cavity area.