automobile tailboard cylinder Sold to Cameroon

This article mainly introduces:

Cameroon hydraulic cylinder,automobile tailboard cylinder manufacturer,automobile tailboard cylinder

(Cameroon automobile tailboard cylinder,produced by Hengyu Group）

automobile tailboard cylinder are widely used in Cameroon，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed automobile tailboard cylinder for customers from Cameroon.

Introduction to automobile tailboard cylinder:

The oil automobile tailboard cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular automobile tailboard cylinder action. Troubleshooting method: Replace the rubber hose.

When the automobile tailboard cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the automobile tailboard cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

Before the automobile tailboard cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.

Answers to some questions about automobile tailboard cylinder:

How to calculate the cylinder diameter, rod diameter and pressure of the cylinder, and how to output tonnage?
Hydraulic cylinder output force F=PAX10^3(KN) F is the output force (KN), P working pressure (MPa), A is the piston or plunger area of action.

How to use a solenoid valve to control the expansion of a cylinder? Doesn't the solenoid valve only control on/off?
Use the solenoid valve P into A-B (generally equipped with oil circuit board) to connect the oil inlet interface at both ends of the cylinder, and the solenoid valve can be realized by power off (refer to the solenoid valve 2B2L, different solenoid valve actions are different).