steering power cylinder Sold to Pakistan

This article mainly introduces:

Pakistan hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(Pakistan steering power cylinder,produced by Hengyu Group）

steering power cylinder are widely used in Pakistan，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed steering power cylinder for customers from Pakistan.

Introduction to steering power cylinder:

The pressure, temperature, medium and speed of different types of seals are not the same, water-ethylene glycol medium (HFC) can not be sealed with polyurethane, it can only use rubber seal; When the steering power cylinder is running fast, it must be sealed with slip ring, such as Sterseal, Glairing, GD1000K, TDI, etc., when the running speed is slow, Yx, U, V combination seals can be used; Fluorine rubber seal is used in high temperature and high pressure environment; When the running speed is fast, the buffer sleeve and buffer valve must be considered.

Do not regularly check the damage of the chrome layer of the steering power cylinder: completely extend the steering power cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the steering power cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the steering power cylinder seal. Welding slag is strictly prohibited on the surface of the steering power cylinder.

The advantages and disadvantages of the steering power cylinder: the surface of the steering power cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the steering power cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

If it is found that the steering power cylinder lubrication is poor or the steering power cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the steering power cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the steering power cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the steering power cylinder center line. In this way, when the piston works in the steering power cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the steering power cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

Answers to some questions about steering power cylinder:

What is the thin cylinder used for?
The principle is no different from ordinary cylinders, that is, the installation space is small, the formation is small, and it is suitable for some special occasions. For example, the space is compact and the place of small travel is used.

How does the one-way solenoid valve control the hydraulic cylinder circuit?
If your cylinder is single-acting, you can use a one-way solenoid valve, such as some lifting platform hydraulic cylinder, the support valve used is one-way (two-position tee), that is, the cylinder extends out by the oil pressure top, the cylinder retracted by its own weight.