shearing machine cylinder Sold to Turkey

This article mainly introduces:

Turkey hydraulic cylinder,shearing machine cylinder manufacturer,shearing machine cylinder

(Turkey shearing machine cylinder,produced by Hengyu Hydraulic Cylinder Factory）

shearing machine cylinder are widely used in Turkey，because of high work efficiency，excellent fatigue and impact resistance，simple structure and reliable operation.So our company has designed shearing machine cylinder for customers from Turkey.

Introduction to shearing machine cylinder:

The internal leakage of the shearing machine cylinder is an important indicator to measure the quality of the shearing machine cylinder: the internal leakage of the shearing machine cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the shearing machine cylinder, so that the shearing machine cylinder can not accurately and stably stop in a certain position of the shearing machine cylinder, so it is one of the main indicators of the shearing machine cylinder.

The shearing machine cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the shearing machine cylinder, bite. Elimination method: When installing the shearing machine cylinder, ensure that the axis position of the shearing machine cylinder is consistent with the direction of movement; Make the load borne by the shearing machine cylinder as far as possible through the shearing machine cylinder axis, to avoid the phenomenon of eccentricity.

When producing oil shearing machine cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

The commonly used buffer structure of the shearing machine cylinder is composed of a piston boss and a shearing machine cylinder head groove. When the piston moves close to the shearing machine cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

Answers to some questions about shearing machine cylinder:

What is the material of the lift cylinder?
The cylinder is composed of many parts. The cylinder also contains the seal and the installation port at both ends, the material of these two parts is not easy to determine if there is no physical object. The cylinder body is generally 20 steel, 45 steel, 27SiMn and other materials, and the piston rod is generally 40Cr, 45 steel and other materials.

Why is the cylinder not in place when the concrete pump truck changes the piston?
When the concrete pump truck changes the piston, the cylinder is not in place mainly because the transfer oil connecting the two cylinders is not completely drained. Sany and Zhonglian have a piston return switch, which can be used to back the piston to the cleaning tank. The elephant is equipped with a stop valve at the bottom of the oil cylinder, usually in the closed state, when opened, the piston can be returned to the cleaning tank, remember to close the valve after the piston is updated.