self-locking hydraulic cylinder Sold to Sweden

This article mainly introduces:

Sweden hydraulic cylinder,self-locking hydraulic cylinder manufacturer,self-locking hydraulic cylinder

(Sweden self-locking hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

self-locking hydraulic cylinder are widely used in Sweden，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed self-locking hydraulic cylinder for customers from Sweden.

Introduction to self-locking hydraulic cylinder:

The main role of the self-locking hydraulic cylinder: the self-locking hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the self-locking hydraulic cylinder realizes reciprocating motion. The structure of the self-locking hydraulic cylinder has three categories: piston self-locking hydraulic cylinder, plunger self-locking hydraulic cylinder, swing self-locking hydraulic cylinder, piston self-locking hydraulic cylinder and plunger self-locking hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing self-locking hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the self-locking hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The self-locking hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

The internal leakage of the self-locking hydraulic cylinder should be prevented when the self-locking hydraulic cylinder is used. The internal leakage of self-locking hydraulic cylinder includes the leakage caused by excessive wear of self-locking hydraulic cylinder block seal, piston rod and seal cover seal and piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time.

The piston seal of the self-locking hydraulic cylinder is the main element to prevent leakage in the self-locking hydraulic cylinder. For the lip seal, it should focus on checking whether the lip edge is bruised and worn, and for the combination seal, it should focus on checking the wear of the sealing surface, and then determine whether the seal can be used. In addition, it is necessary to check whether the static seal between the piston and the piston rod is crushed. The piston rod seal should focus on checking the wear of the seals and supporting rings.

The self-locking hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the self-locking hydraulic cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The self-locking hydraulic cylinder is basically composed of self-locking hydraulic cylinder and self-locking hydraulic cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

Answers to some questions about self-locking hydraulic cylinder:

Where is the cylinder used? What is it used for? Can it be used in cars?
Cylinders can be used as actuator in hydraulic system. Such as hydraulic jacks, dump truck box lifting device, dodging (snow) machine loader bucket lifting device. Hydraulic cylinders are also widely used in car cranes. It's all about cars.

When there is only one hole in the oil inlet and outlet of the hydraulic cylinder, will there be oil leakage?
It is a single acting oil cylinder. This oil cylinder is always driven by hydraulic oil in advance, and is generally pulled back by the spring at the bottom of the piston or the weight of the cylinder piston or the load. But either way, it has nothing to do with any internal leakage. Whether the oil is internally drained is related to the sealing and accuracy of the cylinder itself.