self-locking hydraulic cylinder Sold to Ecuador

This article mainly introduces:

Ecuador hydraulic cylinder,self-locking hydraulic cylinder manufacturer,self-locking hydraulic cylinder

(Ecuador self-locking hydraulic cylinder,produced by Hengyu Group）

self-locking hydraulic cylinder are widely used in Ecuador，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed self-locking hydraulic cylinder for customers from Ecuador.

Introduction to self-locking hydraulic cylinder:

self-locking hydraulic cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

self-locking hydraulic cylinder buffer valve inspection and maintenance: For the valve buffer self-locking hydraulic cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

When the self-locking hydraulic cylinder is repaired, its inner and outer diameter and roundness should be accurately measured. If the inner hole of the self-locking hydraulic cylinder is badly worn, it can be repaired by grinding the mandrel or honing on the boring machine. If the piston is worn, it can be repaired by electroplating, and serious wear should be replaced.

The daily inspection of the self-locking hydraulic cylinder includes: checking the connection of the self-locking hydraulic cylinder and the pipe joint for leaks. Check the self-locking hydraulic cylinder rod for leaks. Check the self-locking hydraulic cylinder connection for leaks. When the self-locking hydraulic cylinder moves, the work is normal and smooth. Whether the self-locking hydraulic cylinder has internal leakage.

Answers to some questions about self-locking hydraulic cylinder:

How is the hydraulic cylinder selected in the mechanical design manual?
First of all, it is necessary to meet your work needs, and the second is to meet the structural space of the cylinder and accessories. Three to consider the other parameters of the cylinder.

What is the function of the Reza mounted master cylinder?
The role of the Resa-mounted master cylinder is to pump the concrete from the hopper to the delivery pipe and to provide sufficient concrete outlet pressure so that the concrete can reach the specified location.