magnetic ring induction cylinder Sold to Peru

This article mainly introduces:

Peru hydraulic cylinder,magnetic ring induction cylinder manufacturer,magnetic ring induction cylinder

(Peru magnetic ring induction cylinder,produced by Hengyu Hydraulic Co., Ltd）

magnetic ring induction cylinder are widely used in Peru，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed magnetic ring induction cylinder for customers from Peru.

Introduction to magnetic ring induction cylinder:

magnetic ring induction cylinder can not drive the load troubleshooting: oil pressure is too low. magnetic ring induction cylinder selection specifications are too small. Leakage in magnetic ring induction cylinder or associated hydraulic system element.

Protection of the magnetic ring induction cylinder surface: During the dismantling process, safety protection should be carried out on the magnetic ring induction cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the magnetic ring induction cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the magnetic ring induction cylinder should be cleaned up in time.

The magnetic ring induction cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the magnetic ring induction cylinder, bite. Elimination method: When installing the magnetic ring induction cylinder, ensure that the axis position of the magnetic ring induction cylinder is consistent with the direction of movement; Make the load borne by the magnetic ring induction cylinder as far as possible through the magnetic ring induction cylinder axis, to avoid the phenomenon of eccentricity.

The internal leakage of the magnetic ring induction cylinder is an important indicator to measure the quality of the magnetic ring induction cylinder: the internal leakage of the magnetic ring induction cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the magnetic ring induction cylinder, so that the magnetic ring induction cylinder can not accurately and stably stop in a certain position of the magnetic ring induction cylinder, so it is one of the main indicators of the magnetic ring induction cylinder.

Answers to some questions about magnetic ring induction cylinder:

Is it good or bad for the hydraulic cylinder working in the limit stroke position?
It is not good for the hydraulic cylinder working in the limit stroke position. Generally, when the cylinder is used in the limit stroke, the oil in the cylinder will form a backflow back pressure impact on the piston and guide sleeve seals. If the limit is not accurate, it is easy to cause collision damage. It is recommended to leave a buffer of ten to twenty centimeters.

The two cylinders of the bending machine are out of sync?
Check whether the sliding slide is worn, adjust its tightness, so that both sides are consistent, check whether the two cylinder tubing is connected, tighten the flow valve, pressure, let the cylinder air discharge.