track steering cylinder Sold to India

This article mainly introduces:

India hydraulic cylinder,track steering cylinder manufacturer,track steering cylinder

(India track steering cylinder,produced by Hebei Hengyu company）

track steering cylinder are widely used in India，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed track steering cylinder for customers from India.

Introduction to track steering cylinder:

track steering cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards track steering cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the track steering cylinder guide is determined by the length of the stroke. Check the strength of track steering cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

The track steering cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the track steering cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the track steering cylinder wall due to the stiffness and the weight of the parts, causing scars.

When the control pressure of the hydraulic system is too low, the track steering cylinder will appear wrong or no action, because the throttle resistance in the control pipeline may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is interfered with. At this time, check the control pressure source to ensure that the pressure is adjusted to the specified value of the system.

Do not regularly check the damage of the chrome layer of the track steering cylinder: completely extend the track steering cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the track steering cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the track steering cylinder seal. Welding slag is strictly prohibited on the surface of the track steering cylinder.

Answers to some questions about track steering cylinder:

What is the cause of sound and vibration when the hydraulic cylinder is under load?
The main reason 1) may be that the load machinery has stuck phenomenon, and the resistance is large. 2) The hydraulic oil is not enough, or the filter is blocked by dirty things, and the oil is flooded. 3) There is a problem with the pump.

How to achieve hydraulic cylinder self-locking?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil self-locking is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.