steering power cylinder Sold to Canada

This article mainly introduces:

Canada hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(Canada steering power cylinder,produced by Hengyu Hydraulic Cylinder Factory）

steering power cylinder are widely used in Canada，because of long service life，smooth movement，high work efficiency.So our company has designed steering power cylinder for customers from Canada.

Introduction to steering power cylinder:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

The main role of the steering power cylinder: the steering power cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the steering power cylinder realizes reciprocating motion. The structure of the steering power cylinder has three categories: piston steering power cylinder, plunger steering power cylinder, swing steering power cylinder, piston steering power cylinder and plunger steering power cylinder to achieve reciprocating linear motion, output speed and thrust, swing steering power cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the steering power cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The steering power cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Causes and countermeasures of oil steering power cylinder leakage: Cast iron ring seal allows a certain degree of internal leakage. The impurities in the steering power cylinder will lead to premature wear of the piston seal, replace the piston seal; If the steering power cylinder is visibly scarred, the steering power cylinder must be replaced. It can be pressurized at one end of the steering power cylinder and opened at the other end of the oil port to observe whether there is obvious internal leakage at the end of the oil port. Most steering power cylinder piston drift may not come from the steering power cylinder, the above method to determine the steering power cylinder without internal leakage is helpful to determine the problem of the hydraulic system related components.

The steering power cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the steering power cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The steering power cylinder is basically composed of steering power cylinder and steering power cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

Answers to some questions about steering power cylinder:

What is hydraulic cylinder guide?
The cylinder itself can not move, the piston moves, the guide should be used to guide the mechanism connected with the piston extension end. For example, in the commonly used hydraulic press, the guide column above is used to guide the pressure plate connected with the piston.

What is the cylinder with rod cavity, what is the rodless cavity.
The rod cavity is the end of the piston rod, the rodless cavity is the end without the piston rod.