electric lift cylinder(electric lift cylinder,produced by Hengyu Group）electric lift cylinder are widely used ，because of no transmission clearance，powerful torque，clever hyd
(electric lift cylinder,produced by Hengyu Group）
electric lift cylinder are widely used ，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed electric lift cylinder for our customers.
When the electric lift cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the electric lift cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil electric lift cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical electric lift cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the electric lift cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.
The advantages and disadvantages of the electric lift cylinder: the surface of the electric lift cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the electric lift cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.
The scar on the sliding surface of the electric lift cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the electric lift cylinder wall. Therefore, before installation, these scars must be fully repaired.
Under normal circumstances, the electric lift cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the electric lift cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the electric lift cylinder and the end cover, the piston and the piston rod, the piston and the electric lift cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the electric lift cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.
What is a differential cylinder?
The differential cylinder is by connecting the return oil of the rod cavity through the pipeline, allowing them to flow into the rodless cavity, thereby speeding up the extension speed of the piston rod. In fact, the cylinder is still the cylinder, but the oil circuit is related to the connection. The oil connection mode in which both chambers of a single rod hydraulic cylinder are fed hydraulic oil is called differential connection.
What is the cause of the sound of the excavator arm cylinder?
Hydraulic excavator cylinder includes boom cylinder, bucket rod cylinder and bucket cylinder, four cylinders. The sound of boom cylinder may be the wear of hydraulic cylinder block bushing, piston rod bushing and shaft pin. The main reason: poor lubrication, followed by improper clearance in the assembly process. Countermeasures: (1) Strictly lubricate each shaft pin at least once every 8 hours when the excavator is initially used for 100 hours and under harsh conditions; In other working conditions, lubricate each pin at least once every 50 hours. (2) If the lubricating oil passage is found to be blocked, it must be stopped for rectification. (3) Require assembly, replacement of all parts of the shaft pin, bushing strictly comply with the assembly testing standards and operating procedures.
Add Wechat