press hydraulic cylinder Sold to Puerto Rico

This article mainly introduces:

Puerto Rico hydraulic cylinder,press hydraulic cylinder manufacturer,press hydraulic cylinder

(Puerto Rico press hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

press hydraulic cylinder are widely used in Puerto Rico，because of long service life，smooth movement，high work efficiency.So our company has designed press hydraulic cylinder for customers from Puerto Rico.

Introduction to press hydraulic cylinder:

The press hydraulic cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the press hydraulic cylinder should pay attention to: the operation should be as far away from the press hydraulic cylinder as possible, to avoid falling objects, knocking, rubbing the press hydraulic cylinder coating. When cleaning the press hydraulic cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the press hydraulic cylinder when the oil temperature exceeds 70 ° C.

The definition of the minimum stable speed refers to the minimum movement speed of the press hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the press hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.

The material of the sliding part of the press hydraulic cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

When using the press hydraulic cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the press hydraulic cylinder block. If the press hydraulic cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the press hydraulic cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the press hydraulic cylinder, so that the working efficiency of the press hydraulic cylinder is reduced.

Answers to some questions about press hydraulic cylinder:

What is the smallest cylinder size?
The smallest shape cylinder I have ever seen is a hydraulic clamping cylinder in the machine tool industry. Outer diameter 24 mm, total length 23 mm, travel 4 mm. Weighs 0.05 kg. Maximum clamping force 3500 Newtons.

Hydraulic cylinder load algorithm?
If it is thrust, load = working pressure x piston area. If it is pulling force, load = working pressure x(piston area - piston rod area).