filter hydraulic cylinder Sold to Slovakia

This article mainly introduces:

Slovakia hydraulic cylinder,filter hydraulic cylinder manufacturer,filter hydraulic cylinder

(Slovakia filter hydraulic cylinder,produced by Hebei Hengyu company）

filter hydraulic cylinder are widely used in Slovakia，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed filter hydraulic cylinder for customers from Slovakia.

Introduction to filter hydraulic cylinder:

How to repair the filter hydraulic cylinder body when it is damaged: When the filter hydraulic cylinder has trace deformation and shallow tensile marks, the filter hydraulic cylinder is repaired by strong honing process. The heavy honing process can repair filter hydraulic cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the filter hydraulic cylinder can meet the technical requirements.

filter hydraulic cylinder use should try to avoid sealing belt into the filter hydraulic cylinder. As a simple sealing material, polytetrafluoroethylene plastic sealing tape is often used in installation and inspection, and if the winding method of the linear and ribbon-shaped sealing material is wrong, the sealing tape will be cut off and enter the filter hydraulic cylinder. The wire belt seal will not have any effect on the winding of the sliding part, but it will cause the check valve of the filter hydraulic cylinder to fail to operate or the buffer regulating valve can not be adjusted to the end. For the circuit, it may cause the action of the reversing valve, the relief valve and the reducing valve to fail.

filter hydraulic cylinder buffer valve inspection and maintenance: For the valve buffer filter hydraulic cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

The filter hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

Answers to some questions about filter hydraulic cylinder:

How does the cylinder work?
Hydraulic transmission principle: oil as the working medium, through the change of the sealing volume to transfer movement, through the internal pressure of the oil to transfer power. 1. The power part - converts the mechanical energy of the prime mover into the pressure energy of the oil (hydraulic energy). For example: hydraulic pump. 2, the executive part - the hydraulic pump input oil pressure energy into the mechanical energy to drive the working mechanism. For example: hydraulic cylinder, hydraulic motor. 3, the control part - used to control and adjust the oil pressure, flow and flow direction. For example: pressure control valve, flow control valve and direction control valve. 4, the auxiliary part - the first three parts are connected together to form a system, which plays the role of oil storage, filtration, measurement and sealing.

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.