forklift tilting cylinder Sold to Belgium

This article mainly introduces:

Belgium hydraulic cylinder,forklift tilting cylinder manufacturer,forklift tilting cylinder

(Belgium forklift tilting cylinder,produced by Hengyu Hydraulic Cylinder Factory）

forklift tilting cylinder are widely used in Belgium，because of smooth movement，excellent fatigue and impact resistance，high work efficiency.So our company has designed forklift tilting cylinder for customers from Belgium.

Introduction to forklift tilting cylinder:

The difference between the plunger forklift tilting cylinder and the piston forklift tilting cylinder is that the piston in the forklift tilting cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type forklift tilting cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

The main role of the forklift tilting cylinder: the forklift tilting cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the forklift tilting cylinder realizes reciprocating motion. The structure of the forklift tilting cylinder has three categories: piston forklift tilting cylinder, plunger forklift tilting cylinder, swing forklift tilting cylinder, piston forklift tilting cylinder and plunger forklift tilting cylinder to achieve reciprocating linear motion, output speed and thrust, swing forklift tilting cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the forklift tilting cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The forklift tilting cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular forklift tilting cylinder action. Troubleshooting method: Replace the rubber hose.

When the forklift tilting cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the forklift tilting cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about forklift tilting cylinder:

What is the rated pressure of the general cylinder?
This depends on the model of the cylinder, 1. The rated pressure of the light tie rod cylinder is 7 series 7MPa and 14 series 14MPa. 2. Rated pressure of engineering cylinder 16MPa. 3. Rexroth type metallurgical cylinder rated pressure 250MPa.

What does cylinder speed ratio mean?
The speed ratio of the cylinder is the ratio of the reciprocating speed of the piston, equal to the ratio of the rodless cavity area to the roded cavity area.