Release time：2023-11-12 15:29:42 Hits： Current position: Home > News
This article mainly introduces:
Argentina hydraulic cylinder,electric lift cylinder manufacturer,electric lift cylinder
(Argentina electric lift cylinder,produced by Hengyu Group）
electric lift cylinder are widely used in Argentina，because of smooth movement，no need for deceleration device，long service life.So our company has designed electric lift cylinder for customers from Argentina.
electric lift cylinder piston rod material introduction: In general, we use 45 steel to produce electric lift cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.
The main role of the electric lift cylinder: the electric lift cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the electric lift cylinder realizes reciprocating motion. The structure of the electric lift cylinder has three categories: piston electric lift cylinder, plunger electric lift cylinder, swing electric lift cylinder, piston electric lift cylinder and plunger electric lift cylinder to achieve reciprocating linear motion, output speed and thrust, swing electric lift cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the electric lift cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The electric lift cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.
electric lift cylinder buffer valve inspection and maintenance: For the valve buffer electric lift cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.
When the electric lift cylinder is kept, do not pay attention to keeping the oil port open, which will produce the condition of accepting foreign bodies at all times, which is absolutely not allowed. Storage must be filled with anti-rust oil or working oil, and plug.
How is the cylinder of hydraulic cylinder processed?
As the main parts of hydraulic cylinder, mining single pillar, hydraulic support, gun barrel and other products, its processing quality directly affects the life and reliability of the whole product. Cylinder processing requirements are high, the internal surface roughness requirements are Ra0.4 ~ 0.8&um, the coaxiality, wear resistance requirements are strict. The basic feature of cylinder is deep hole processing, which has always troubled the processing personnel. Due to the residual compressive stress on the surface of the surface layer, the rolling machining is helpful to seal the small cracks on the surface and prevent the expansion of erosion. Thus, the corrosion resistance of the surface can be improved, and the fatigue crack can be delayed or expanded, and the fatigue strength of the cylinder can be improved.
The cylinder is moving too fast. I want to slow it down. What can I do?
The hydraulic cylinder is the execution action, and the power source is the hydraulic system. The cylinder speed is too fast, indicating that the system flow is large, the hydraulic system has a hydraulic valve responsible for speed control function, method: 1, by adjusting the speed control valve to reduce the speed; 2, the speed control valve has been adjusted to the lowest, indicating that the hydraulic system design flow is too high, the need to re-configure the hydraulic system according to demand, or the cylinder diameter is changed.
Add Wechat