Release time：2023-11-12 15:29:57 Hits： Current position: Home > News
This article mainly introduces:
Qatar hydraulic cylinder,sanitation truck hydraulic cylinder manufacturer,sanitation truck hydraulic cylinder
(Qatar sanitation truck hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）
sanitation truck hydraulic cylinder are widely used in Qatar，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed sanitation truck hydraulic cylinder for customers from Qatar.
The sanitation truck hydraulic cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the sanitation truck hydraulic cylinder should pay attention to: the operation should be as far away from the sanitation truck hydraulic cylinder as possible, to avoid falling objects, knocking, rubbing the sanitation truck hydraulic cylinder coating. When cleaning the sanitation truck hydraulic cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the sanitation truck hydraulic cylinder when the oil temperature exceeds 70 ° C.
The internal leakage of the sanitation truck hydraulic cylinder is an important indicator to measure the quality of the sanitation truck hydraulic cylinder: the internal leakage of the sanitation truck hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the sanitation truck hydraulic cylinder, so that the sanitation truck hydraulic cylinder can not accurately and stably stop in a certain position of the sanitation truck hydraulic cylinder, so it is one of the main indicators of the sanitation truck hydraulic cylinder.
1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.
Factors that should be considered when selecting the oil seal in the sanitation truck hydraulic cylinder: some specific factors should be taken into account when selecting the oil seal in the sanitation truck hydraulic cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: sanitation truck hydraulic cylinder diameter, piston rod diameter, piston rod and piston groove size, sanitation truck hydraulic cylinder working pressure, sanitation truck hydraulic cylinder movement speed, hydraulic system oil temperature and sanitation truck hydraulic cylinder working environment.
How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.
How big is the motor and oil pump for the 80 cylinder?
Pump motor selection is not only related to cylinder diameter but also speed system, it is recommended to provide system diagram and speed requirements, generally speaking, most of the 80 cylinder on the market is equipped with 3-4KW motor, 10-20 oil pump.
Add Wechat