electric lift cylinder Sold to The Philippines

This article mainly introduces:

The Philippines hydraulic cylinder,electric lift cylinder manufacturer,electric lift cylinder

(The Philippines electric lift cylinder,produced by Hengyu Group）

electric lift cylinder are widely used in The Philippines，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed electric lift cylinder for customers from The Philippines.

Introduction to electric lift cylinder:

The main role of the electric lift cylinder: the electric lift cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the electric lift cylinder realizes reciprocating motion. The structure of the electric lift cylinder has three categories: piston electric lift cylinder, plunger electric lift cylinder, swing electric lift cylinder, piston electric lift cylinder and plunger electric lift cylinder to achieve reciprocating linear motion, output speed and thrust, swing electric lift cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the electric lift cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The electric lift cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

The electric lift cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the electric lift cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the electric lift cylinder wall due to the stiffness and the weight of the parts, causing scars.

Factors that should be considered when selecting the oil seal in the electric lift cylinder: some specific factors should be taken into account when selecting the oil seal in the electric lift cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: electric lift cylinder diameter, piston rod diameter, piston rod and piston groove size, electric lift cylinder working pressure, electric lift cylinder movement speed, hydraulic system oil temperature and electric lift cylinder working environment.

electric lift cylinder buffer valve inspection and maintenance: For the valve buffer electric lift cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

Answers to some questions about electric lift cylinder:

What is the cause of the deep scratch of the cylinder?
The following reasons can cause the cylinder to be scratched. 1: Hydraulic oil containing particulate impurities into the hydraulic cylinder, these particulate impurities stuck between the piston rod and the guide ring (or stuck between the piston and the inner wall of the cylinder), when the piston movement in the cylinder will scratch the piston rod, the phenomenon of the inner wall of the cylinder, the more particles, the larger the scratch marks the deeper and more obvious. 2: The body of the cylinder itself. Due to assembly or design reasons, the coaxial error between the piston rod, piston, cylinder, guide ring and other parts is too large, or the cylinder, piston rod straightness error is too large, so that the piston rod and the guide ring interference between the cylinder, this mechanical interference will certainly lose the piston rod or cylinder wall.

What is hydraulic cylinder？ How to use hydraulic cylinder？ what is the application of hydraulic cylinder?
Hydraulic cylinder is the hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating movement (or swing movement). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the hydraulic cylinder is proportional to the effective area of the piston and the pressure difference between the two sides. The hydraulic cylinder is basically composed of cylinder body, cylinder head, piston, piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential. Hydraulic cylinders are mainly used in machinery.