forklift steering cylinder Sold to Cote d 'Ivoire

This article mainly introduces:

Cote d 'Ivoire hydraulic cylinder,forklift steering cylinder manufacturer,forklift steering cylinder

(Cote d 'Ivoire forklift steering cylinder,produced by Hebei Hengyu company）

forklift steering cylinder are widely used in Cote d 'Ivoire，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed forklift steering cylinder for customers from Cote d 'Ivoire.

Introduction to forklift steering cylinder:

The forklift steering cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

The definition of the minimum starting pressure of the forklift steering cylinder refers to the minimum working pressure of the forklift steering cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the forklift steering cylinder parts and the size of the sealing friction.

If the forklift steering cylinder slips or crawls, please check whether there is astringency inside the forklift steering cylinder, because the internal parts of the forklift steering cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the forklift steering cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the forklift steering cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

The internal leakage of the forklift steering cylinder should be prevented when the forklift steering cylinder is used. The internal leakage of forklift steering cylinder includes the leakage caused by excessive wear of forklift steering cylinder block seal, piston rod and seal cover seal and piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time.

Answers to some questions about forklift steering cylinder:

When does the cylinder rotate?
The piston rod inside the multistage plunger cylinder can be rotated, and it will rotate when it is subjected to tangential force.

What is the bearing capacity of the HOB cylinder?
The normal specification of HOB is 140 kg pressure, which is more commonly used in the market, and there are clear marks on the cylinder, 210 kg is a strengthened version of HOB, generally customized cylinders are also clearly marked on the above, when the specific use of the cylinder, the maximum use pressure is marked on the cylinder.