Release time：2023-11-12 15:32:59 Hits： Current position: Home > News
This article mainly introduces:
The Philippines hydraulic cylinder,stainless steel cylinder manufacturer,stainless steel cylinder
(The Philippines stainless steel cylinder,produced by Hengyu Hydraulic Cylinder Factory）
stainless steel cylinder are widely used in The Philippines，because of no need for deceleration device，long service life，smooth movement.So our company has designed stainless steel cylinder for customers from The Philippines.
Disassembly stainless steel cylinder: When disassembly stainless steel cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the stainless steel cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the stainless steel cylinder.
stainless steel cylinder installation precautions: Before installing the stainless steel cylinder into the system, the parameters on the stainless steel cylinder label should be compared with the parameters when ordering. The base of the stainless steel cylinder must have sufficient stiffness, otherwise the stainless steel cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.
When the stainless steel cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the stainless steel cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.
The stainless steel cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the stainless steel cylinder, bite. Elimination method: When installing the stainless steel cylinder, ensure that the axis position of the stainless steel cylinder is consistent with the direction of movement; Make the load borne by the stainless steel cylinder as far as possible through the stainless steel cylinder axis, to avoid the phenomenon of eccentricity.
How does the cylinder work?
Hydraulic transmission principle: oil as the working medium, through the change of the sealing volume to transfer movement, through the internal pressure of the oil to transfer power. 1. The power part - converts the mechanical energy of the prime mover into the pressure energy of the oil (hydraulic energy). For example: hydraulic pump. 2, the executive part - the hydraulic pump input oil pressure energy into the mechanical energy to drive the working mechanism. For example: hydraulic cylinder, hydraulic motor. 3, the control part - used to control and adjust the oil pressure, flow and flow direction. For example: pressure control valve, flow control valve and direction control valve. 4, the auxiliary part - the first three parts are connected together to form a system, which plays the role of oil storage, filtration, measurement and sealing.
What valve is used to control cylinder expansion?
Mainly use reversing valve, but the details of the control need hydraulic control valve, hydraulic control valve can be divided into direction control valve, pressure control valve, flow control valve. The valve controls the expansion of the cylinder is the direction control valve, that is, the reversing valve. What is the meaning of two-position three-way and three-position four-way of the reversing valve? Usually according to the different working positions that can stay after the spool is moved, it can be divided into: two-position valves, three-position valves and multi-position valves. According to the number of different slide valve channels can be divided into: two-way valve, three-way valve, four-way valve, five-way valve and multi-way valve. The name of the reversing valve is called the multi-position and multi-pass reversing valve according to its working position and the number of channels.
Add Wechat