hydraulic jig cylinder Sold to Pakistan

This article mainly introduces:

Pakistan hydraulic cylinder,hydraulic jig cylinder manufacturer,hydraulic jig cylinder

(Pakistan hydraulic jig cylinder,produced by Hebei Hengyu company）

hydraulic jig cylinder are widely used in Pakistan，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed hydraulic jig cylinder for customers from Pakistan.

Introduction to hydraulic jig cylinder:

Before purchasing the hydraulic jig cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

hydraulic jig cylinder abnormal sound, hysteresis phenomenon cause and elimination method: the piston rod is extended with abnormal sound and hysteresis, if the hydraulic jig cylinder is placed for a period of time, the hydraulic jig cylinder may enter the air, and the movement can be normal after dozens of repeated movements. If it still cannot be eliminated, check whether the load is aligned with the axis of the piston rod; Retracted piston rod installation helps to align the load with the piston rod. If the flow is unstable, it will also lead to abnormal movement of the piston rod. Check the relevant components of the hydraulic system.

hydraulic jig cylinder piston sealing is best to use Yx ring, polyurethane and polytetrafluoroethylene sealing material combination, can significantly improve the sealing performance: (I), reduce friction resistance, no crawling phenomenon; (ii) Have good dynamic and static sealing, wear resistance, long service life; (iii) The installation groove is simple, and the disassembly is simple.

hydraulic jig cylinder seal leakage causes and countermeasures: a. Loose tie rod nut will cause leakage, tighten the tie rod nut according to the torque requirements of tie rod nut, test no leakage can continue to use. b. Pressure exceeding the limit will also cause leakage. Replace the hydraulic jig cylinder seal and re-tighten the tie rod nut to reduce the pressure to the nominal pressure range of the hydraulic jig cylinder. c. The hydraulic jig cylinder seal is extruded, if the O-ring is obviously extruded at the hydraulic jig cylinder seal, replace the hydraulic jig cylinder seal.

Answers to some questions about hydraulic jig cylinder:

The diameter of the cylinder is 180mm and the pressure is 14mpa. How many tons can the cylinder hold?
Calculate the area of the cylinder, 3.14*9*9=254.34 square centimeters, take the approximate number of engineering, 1 mpa pressure is about 10 kg per square centimeter, 14 mpa pressure is 140 kg per square centimeter, that is 254.34*140=35607.6 kilograms, it can be known that the cylinder can be about 35 tons in theory.

Cylinder pressure calculation formula
The pressure of the cylinder at work is determined by the load, and the pressure of the physical force is equal to the force divided by the area of action (that is, P=F/S). If you want to calculate the output force of the cylinder, you can calculate it according to the formula: Set the radius of the piston (that is, the cylinder) is R (unit mm) the radius of the piston rod is r (unit mm) the working pressure P (unit MPa) the thrust of the cylinder F push =3.14*R*R*P (unit N) The pulling force of the cylinder F pull =3.14* (R*R-r* R) *P (unit N).