push and pull the cylinder Sold to Sweden

This article mainly introduces:

Sweden hydraulic cylinder,push and pull the cylinder manufacturer,push and pull the cylinder

(Sweden push and pull the cylinder,produced by Hengyu Hydraulic Cylinder Factory）

push and pull the cylinder are widely used in Sweden，because of long service life，smooth movement，high work efficiency.So our company has designed push and pull the cylinder for customers from Sweden.

Introduction to push and pull the cylinder:

When purchasing the push and pull the cylinder, try to clarify the following parameters of the push and pull the cylinder: A. push and pull the cylinder diameter, rod diameter, stroke; B. Working pressure or push and pull the cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right push and pull the cylinder type can be found accurately and quickly.

The advantages and disadvantages of the push and pull the cylinder: the surface of the push and pull the cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the push and pull the cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

At the rated pressure, the thrust of the push and pull the cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the push and pull the cylinder is related to the diameter of the push and pull the cylinder, but not to the stroke of the push and pull the cylinder. Moreover, the larger the push and pull the cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the push and pull the cylinder.

The main role of the push and pull the cylinder: the push and pull the cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the push and pull the cylinder realizes reciprocating motion. The structure of the push and pull the cylinder has three categories: piston push and pull the cylinder, plunger push and pull the cylinder, swing push and pull the cylinder, piston push and pull the cylinder and plunger push and pull the cylinder to achieve reciprocating linear motion, output speed and thrust, swing push and pull the cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the push and pull the cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The push and pull the cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about push and pull the cylinder:

What is the main maintenance of the cylinder?
After disassembling the cylinder: 1, clean the cylinder and piston; 2, replace all seals; 3, if there is a valve to repair, to ensure sealing and flexible; 4, deal with all deformation parts; 5. Installation experiment.

What is the difference between hydraulic cylinder self-adjusting buffer and adjustable buffer?
If it is the buffer device inside the cylinder, then there are 4 basic forms, cylindrical buffer device, conical buffer device, variable throttle and adjustable flow groove. The biggest difference between the first three and the latter is that the latter can be adjusted through the external thimble to change the buffer strength, the first three mainly rely on the buffer device and buffer groove form to achieve the buffer (among them, the first type of buffer strength will not change, and the buffer strength of the two and three forms of buffer devices can be gradually increased).