swager cylinder Sold to Slovenia

This article mainly introduces:

Slovenia hydraulic cylinder,swager cylinder manufacturer,swager cylinder

(Slovenia swager cylinder,produced by Hengyu Group）

swager cylinder are widely used in Slovenia，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed swager cylinder for customers from Slovenia.

Introduction to swager cylinder:

Regular maintenance of the swager cylinder includes: regular tightening, swager cylinder fastening screws and gland screws, swager cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the swager cylinder once a year. Clean regularly, the swager cylinder is cleaned every other year, and the seals are replaced while cleaning.

When the swager cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the swager cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Piston swager cylinder is widely used in hydraulic transmission. When the swager cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the swager cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the swager cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

When the oil pressure of the swager cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

Answers to some questions about swager cylinder:

How many kinds of cylinder seal repair kit are there?
Very much, a wide variety of imported and domestic, J type, UHS, DHS, O-ring, Sterseal, etc., as well as support bars, materials are different, according to the size of the pressure selection is different, the appearance of the structure is different, the size is a variety, maintenance is generally selected according to the needs of the cylinder.

What is a two-way hydraulic cylinder?
Bidirectional hydraulic cylinder definition: The bidirectional hydraulic cylinder uses the oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil. The two-way cylinder has at least two oil ports, which are used to connect the hydraulic tubing, and control the extension and retraction of the cylinder by pressing.