shearing machine cylinder Sold to Colombia

This article mainly introduces:

Colombia hydraulic cylinder,shearing machine cylinder manufacturer,shearing machine cylinder

(Colombia shearing machine cylinder,produced by Hebei Hengyu company）

shearing machine cylinder are widely used in Colombia，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed shearing machine cylinder for customers from Colombia.

Introduction to shearing machine cylinder:

The internal leakage of the shearing machine cylinder is an important indicator to measure the quality of the shearing machine cylinder: the internal leakage of the shearing machine cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the shearing machine cylinder, so that the shearing machine cylinder can not accurately and stably stop in a certain position of the shearing machine cylinder, so it is one of the main indicators of the shearing machine cylinder.

The shearing machine cylinder is mainly composed of body, piston, piston rod, shearing machine cylinder head, shearing machine cylinder bottom, piston rod head and related auxiliary devices. The piston divides the shearing machine cylinder into two chambers, and moves reciprocally in the shearing machine cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the shearing machine cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the shearing machine cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the shearing machine cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the shearing machine cylinder bottom and the shearing machine cylinder head is serious, so the buffer deceleration should be set at both ends of the shearing machine cylinder The working medium of the shearing machine cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; shearing machine cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the shearing machine cylinder: The buffer structure of the shearing machine cylinder is to prevent the piston from colliding with the shearing machine cylinder head at the end of the stroke.

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

If the piston rod and shearing machine cylinder are stuck or the shearing machine cylinder is blocked, at this time, no matter how to operate, the shearing machine cylinder does not move or has little action. At this time, check whether the piston and piston rod seal is too tight, whether it enters the dirt and gum deposits: whether the shaft line of the piston rod and the shearing machine cylinder is in the center, whether the wearing parts and seals are invalid, and whether the load is too large.

Answers to some questions about shearing machine cylinder:

Are hydraulic cylinders divided into oil cylinders and water cylinders? What's the difference between the two types?
There are oil cylinders and water cylinders. The two cylinders are used in different environments. Oil cylinders are generally used in places where there is less demand for media, which is our most common hydraulic cylinders. Water cylinders are mainly used for large tonnage presses. Because the equipment is too large, the use of hydraulic oil will cause a relatively large waste. However, water is not pure water, there are oil-in-water emulsion and water-in-oil emulsion. Water has another benefit: it's flame retardant. It is especially suitable for some flammable and explosive occasions. Or with water glycol. The use of pure water is very little, mainly because the seal is not good and easy to rust.

How does the cylinder work?
Hydraulic transmission principle: oil as the working medium, through the change of the sealing volume to transfer movement, through the internal pressure of the oil to transfer power. 1. The power part - converts the mechanical energy of the prime mover into the pressure energy of the oil (hydraulic energy). For example: hydraulic pump. 2, the executive part - the hydraulic pump input oil pressure energy into the mechanical energy to drive the working mechanism. For example: hydraulic cylinder, hydraulic motor. 3, the control part - used to control and adjust the oil pressure, flow and flow direction. For example: pressure control valve, flow control valve and direction control valve. 4, the auxiliary part - the first three parts are connected together to form a system, which plays the role of oil storage, filtration, measurement and sealing.