synchronous hydraulic cylinder Sold to Romania

This article mainly introduces:

Romania hydraulic cylinder,synchronous hydraulic cylinder manufacturer,synchronous hydraulic cylinder

(Romania synchronous hydraulic cylinder,produced by Hebei Hengyu company）

synchronous hydraulic cylinder are widely used in Romania，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed synchronous hydraulic cylinder for customers from Romania.

Introduction to synchronous hydraulic cylinder:

If the seal of the synchronous hydraulic cylinder is softened and sticky, it may be that the seal is incompatible with the hydraulic oil or the nearby lubricating oil, replace the appropriate seal; If the seal becomes hard and loses elasticity, most of it is because the ambient temperature is too high (more than 80 ° C), make appropriate temperature insulation protection or replace the high temperature seal.

When the synchronous hydraulic cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the synchronous hydraulic cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

The main role of the synchronous hydraulic cylinder: the synchronous hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the synchronous hydraulic cylinder realizes reciprocating motion. The structure of the synchronous hydraulic cylinder has three categories: piston synchronous hydraulic cylinder, plunger synchronous hydraulic cylinder, swing synchronous hydraulic cylinder, piston synchronous hydraulic cylinder and plunger synchronous hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing synchronous hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the synchronous hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The synchronous hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

The coordination of the sliding parts of the synchronous hydraulic cylinder itself should not be too tight, the sealing friction force should not be too large, and H8 / f8 coordination should be selected between the piston rod and the guide sleeve; Check whether the size of the sealing ring is processed strictly according to the standard; If the V-shaped sealing ring is used, the sealing friction should be adjusted to a moderate degree.

Answers to some questions about synchronous hydraulic cylinder:

Why can't the hydraulic cylinder be pulled back after pushing to the limit?
May be long-term use to the limit position, resulting in serious wear caused! The solution is to add the stroke switch or disassemble and add gaskets before and after the piston.

How to control the speed of the hydraulic cylinder?
The speed of the hydraulic cylinder is only related to the flow, so the control speed is to control the flow of the hydraulic oil, which is generally adjusted by the throttle valve in the system.