High quality hydraulic equipment manufacturers!
TELL:+8613184968882

electric lift cylinder Sold to Peru

Release time:2023-11-23 08:22:48 Hits: Current position: Home > News

This article mainly introduces:

Peru hydraulic cylinder,electric lift cylinder manufacturer,electric lift cylinder

Peru electric lift cylinder

(Peru electric lift cylinder,produced by Hebei Hengyu company)

electric lift cylinder are widely used in Peru,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed electric lift cylinder for customers from Peru.

Introduction to electric lift cylinder:

electric lift cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

The piston seal of the electric lift cylinder is the main element to prevent leakage in the electric lift cylinder. For the lip seal, it should focus on checking whether the lip edge is bruised and worn, and for the combination seal, it should focus on checking the wear of the sealing surface, and then determine whether the seal can be used. In addition, it is necessary to check whether the static seal between the piston and the piston rod is crushed. The piston rod seal should focus on checking the wear of the seals and supporting rings.

Do not enter foreign bodies when installing the electric lift cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.

electric lift cylinder use should try to avoid sealing belt into the electric lift cylinder. As a simple sealing material, polytetrafluoroethylene plastic sealing tape is often used in installation and inspection, and if the winding method of the linear and ribbon-shaped sealing material is wrong, the sealing tape will be cut off and enter the electric lift cylinder. The wire belt seal will not have any effect on the winding of the sliding part, but it will cause the check valve of the electric lift cylinder to fail to operate or the buffer regulating valve can not be adjusted to the end. For the circuit, it may cause the action of the reversing valve, the relief valve and the reducing valve to fail.

Answers to some questions about electric lift cylinder:

Injection molding machine die thimble on the side of the feed nozzle, the oil cylinder pull the thimble shift, how to debug the oil cylinder?
The cylinder is connected with the neutron of the injection molding machine, the neutron is retreated after the opening mold is in place, the cylinder taps the thimble plate to the top, and then takes, and the neutron is reset.

When the superimposed hydraulic control valve is added to the bottom of a solenoid valve and a double directional throttle valve, why does the cylinder shock on the return trip?
The stack hydraulic control check valve must be added above the stack one-way throttle valve.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP