push plate cylinder Sold to Paraguay

This article mainly introduces:

Paraguay hydraulic cylinder,push plate cylinder manufacturer,push plate cylinder

(Paraguay push plate cylinder,produced by Hengyu Hydraulic Cylinder Factory）

push plate cylinder are widely used in Paraguay，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed push plate cylinder for customers from Paraguay.

Introduction to push plate cylinder:

Do not regularly check the damage of the chrome layer of the push plate cylinder: completely extend the push plate cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the push plate cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the push plate cylinder seal. Welding slag is strictly prohibited on the surface of the push plate cylinder.

When the hydraulic oil is not pumped into the push plate cylinder, it is necessary to check whether the tubing, oil circuit, especially the hose joint has been blocked, and the relevant oil circuit from the push plate cylinder to the pump should be checked in turn and blocked; Check whether the seal between the taper valve and the seat of the relief valve is good; Check whether the solenoid valve spring is damaged or whether the solenoid coil is burned out; Whether the oil circuit is switched is insensitive.

When purchasing the push plate cylinder, try to clarify the following parameters of the push plate cylinder: A. push plate cylinder diameter, rod diameter, stroke; B. Working pressure or push plate cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right push plate cylinder type can be found accurately and quickly.

The advantages and disadvantages of the push plate cylinder: the surface of the push plate cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the push plate cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about push plate cylinder:

When does the cylinder rotate?
The piston rod inside the multistage plunger cylinder can be rotated, and it will rotate when it is subjected to tangential force.

Hydraulic cylinder performance requirements?
Hydraulic cylinder performance requirements: hydraulic cylinder is the hydraulic system to achieve energy transfer, conversion and control of the working medium, in addition, it is also responsible for the lubrication of the system, rust prevention, corrosion prevention and cooling. The performance of hydraulic oil will make the system flexible, accurate and reliable. Hydraulic performance requirements are determined according to the design parameters of the hydraulic system, operating conditions, the structure of the hydraulic pump and the working environment. Appropriate viscosity and good viscosion-temperature performance Viscosity is an important performance indicator of hydraulic pressure, which has an important impact on the smooth operation of the hydraulic system and the friction parts. The low temperature performance of hydraulic oil includes three aspects: low temperature flow, low temperature start-up and low temperature pumping.