magnetic ring induction cylinder Sold to S.Africa

This article mainly introduces:

S.Africa hydraulic cylinder,magnetic ring induction cylinder manufacturer,magnetic ring induction cylinder

(S.Africa magnetic ring induction cylinder,produced by Hengyu Group）

magnetic ring induction cylinder are widely used in S.Africa，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed magnetic ring induction cylinder for customers from S.Africa.

Introduction to magnetic ring induction cylinder:

If the seal of the magnetic ring induction cylinder is abnormal wear, you can check whether the speed control valve is improperly adjusted, resulting in too high back pressure and improper installation of the seal or hydraulic oil contamination. The second is whether there is a foreign body entering the assembly and the quality of the sealing material is not good. The result is that the action is slow and weak, and in serious cases, it will cause damage to the piston and magnetic ring induction cylinder, and the phenomenon of "pulling the magnetic ring induction cylinder" appears. The treatment method is to adjust the speed control valve, and the necessary operation and improvement should be done according to the installation instructions.

Do not regularly check the damage of the chrome layer of the magnetic ring induction cylinder: completely extend the magnetic ring induction cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the magnetic ring induction cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the magnetic ring induction cylinder seal. Welding slag is strictly prohibited on the surface of the magnetic ring induction cylinder.

The magnetic ring induction cylinder should be used correctly and maintained regularly. The magnetic ring induction cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the magnetic ring induction cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

When purchasing the magnetic ring induction cylinder, try to clarify the following parameters of the magnetic ring induction cylinder: A. magnetic ring induction cylinder diameter, rod diameter, stroke; B. Working pressure or magnetic ring induction cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right magnetic ring induction cylinder type can be found accurately and quickly.

Answers to some questions about magnetic ring induction cylinder:

How many kinds of cylinder seal repair kit are there?
Very much, a wide variety of imported and domestic, J type, UHS, DHS, O-ring, Sterseal, etc., as well as support bars, materials are different, according to the size of the pressure selection is different, the appearance of the structure is different, the size is a variety, maintenance is generally selected according to the needs of the cylinder.

What is hydraulic cylinder internal leakage and external leakage?
The internal leakage of the hydraulic cylinder refers to the leakage of the piston head seal of the double-acting cylinder, and the leakage occurs inside the cylinder; The external leakage refers to the leakage phenomenon between the cylinder head (or cylinder guide sleeve) and the plunger rod (or piston rod) and the seal between the guide sleeve and the cylinder block, and the oil in the hydraulic cylinder leaks to the outside.