steering cylinder Sold to Slovenia

This article mainly introduces:

Slovenia hydraulic cylinder,steering cylinder manufacturer,steering cylinder

(Slovenia steering cylinder,produced by Hengyu Group）

steering cylinder are widely used in Slovenia，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed steering cylinder for customers from Slovenia.

Introduction to steering cylinder:

The steering cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure steering cylinder can use 20 steel pipe, and the high pressure steering cylinder can use 45 steel pipe.

After chrome plating of the piston rod of the steering cylinder, the surface flatness is not fully treated: After chrome plating of the piston rod surface, the method of post-plating polishing should be changed to post-plating polishing. Although it is necessary to increase the thickness of the coating before grinding (generally increased by about 0.02 in the diameter direction), it can remove chrome plating defects well, and test the binding force of the coating. In addition, due to the micro-roughness of the grinding surface, the trough can store lubricating oil, which can improve the wear resistance and extend the service life.

The main role of the steering cylinder: the steering cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the steering cylinder realizes reciprocating motion. The structure of the steering cylinder has three categories: piston steering cylinder, plunger steering cylinder, swing steering cylinder, piston steering cylinder and plunger steering cylinder to achieve reciprocating linear motion, output speed and thrust, swing steering cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the steering cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The steering cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

When the piston speed of the steering cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the steering cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.

Answers to some questions about steering cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

What are the four cylinders of the truck crane?
The four cylinders of the truck crane generally refer to the telescopic cylinder of the boom (to adjust the length of the boom), the variable amplitude cylinder of the boom (to adjust the elevation Angle of the boom), the horizontal telescopic cylinder of the support leg and the vertical cylinder of the support leg.