servo cylinder Sold to Slovenia

This article mainly introduces:

Slovenia hydraulic cylinder,servo cylinder manufacturer,servo cylinder

(Slovenia servo cylinder,produced by Hengyu Hydraulic Cylinder Factory）

servo cylinder are widely used in Slovenia，because of long service life，smooth movement，high work efficiency.So our company has designed servo cylinder for customers from Slovenia.

Introduction to servo cylinder:

The role of the servo cylinder in the mold industry: the servo cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the servo cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The servo cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

The main role of the servo cylinder: the servo cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the servo cylinder realizes reciprocating motion. The structure of the servo cylinder has three categories: piston servo cylinder, plunger servo cylinder, swing servo cylinder, piston servo cylinder and plunger servo cylinder to achieve reciprocating linear motion, output speed and thrust, swing servo cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the servo cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The servo cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

The servo cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the servo cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the servo cylinder wall due to the stiffness and the weight of the parts, causing scars.

Answers to some questions about servo cylinder:

What brand of hydraulic cylinder seal ring is best?
Depending on the specific product, the world famous seal brands are NOK, CFW, PARKER, TSS, WKF, DINGZING DZ, ASTON, HALLITE, TECNOLAN and so on.

How to set up the one-way cylinder hydraulic system?
Single acting oil cylinder, that is, an oil cylinder with an oil port, can use two three-way valves to control the cylinder action. The three oil ports are respectively connected to P (oil pump), A (oil cylinder), and T (oil tank). If the oil pump is to run continuously, an electromagnetic relief valve can be added. When the cylinder is not moving, the relief valve can unload the oil pump. You can also add a three-way four-way valve, the middle function is unloaded, two outlets: A connected to the fuel tank, B connected to the cylinder.