This article mainly introduces:
Tunisia hydraulic cylinder,rack cylinder manufacturer,rack cylinder
(Tunisia rack cylinder,produced by Hengyu Hydraulic Cylinder Factory）
rack cylinder are widely used in Tunisia，because of no need for deceleration device，long service life，smooth movement.So our company has designed rack cylinder for customers from Tunisia.
The main role of the rack cylinder: the rack cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the rack cylinder realizes reciprocating motion. The structure of the rack cylinder has three categories: piston rack cylinder, plunger rack cylinder, swing rack cylinder, piston rack cylinder and plunger rack cylinder to achieve reciprocating linear motion, output speed and thrust, swing rack cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the rack cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The rack cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.
When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.
The daily inspection of the rack cylinder includes: checking the connection of the rack cylinder and the pipe joint for leaks. Check the rack cylinder rod for leaks. Check the rack cylinder connection for leaks. When the rack cylinder moves, the work is normal and smooth. Whether the rack cylinder has internal leakage.
Protection of the rack cylinder surface: During the dismantling process, safety protection should be carried out on the rack cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the rack cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the rack cylinder should be cleaned up in time.
How big is a 300-ton cylinder piston?
The rated pressure of the oil pump is 31.5 mpa, the nominal pressure of the hydraulic press is 3150 kN, then the calculated cross-sectional area of the cylinder: S=3150000/31500000=0.1 square meters diameter is: 2* root sign (0.1/3.14) =2*0.178 m =0.356 m 3150 kN hydraulic press is commonly equipped with 31.5 mpa 63 l/min axial piston pump. There are many variable forms of axial piston pump, and the motor size of the pump with the same flow and pressure is not uniform. 31.5 mpa 63 L/min automatic variable pump, can be equipped with 15 kW 4 stage motor; The manual variable pump needs to be equipped with 22 kW 4-stage motor.
How to remove the air in hydraulic cylinder?
Connected the cylinder to the system, and reciprocating move with full stroke several times, then the air can be eliminated . There is also a clunky method as follows: first remove the rod cavity oil pipe, connect the rodless cavity oil circuit to extend all the cylinders, and then remove the rodless cavity oil pipe, connect the rod cavity oil pipe and withdraw all the cylinders, and then connect the rodless cavity oil pipe, so that there is no air in the cylinder.
Add Wechat