tilting furnace hydraulic cylinder Sold to India

This article mainly introduces:

India hydraulic cylinder,tilting furnace hydraulic cylinder manufacturer,tilting furnace hydraulic cylinder

(India tilting furnace hydraulic cylinder,produced by Hengyu Group）

tilting furnace hydraulic cylinder are widely used in India，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed tilting furnace hydraulic cylinder for customers from India.

Introduction to tilting furnace hydraulic cylinder:

The tilting furnace hydraulic cylinder is mainly composed of body, piston, piston rod, tilting furnace hydraulic cylinder head, tilting furnace hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the tilting furnace hydraulic cylinder into two chambers, and moves reciprocally in the tilting furnace hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the tilting furnace hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the tilting furnace hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the tilting furnace hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the tilting furnace hydraulic cylinder bottom and the tilting furnace hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the tilting furnace hydraulic cylinder The working medium of the tilting furnace hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; tilting furnace hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the tilting furnace hydraulic cylinder: The buffer structure of the tilting furnace hydraulic cylinder is to prevent the piston from colliding with the tilting furnace hydraulic cylinder head at the end of the stroke.

The tilting furnace hydraulic cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the tilting furnace hydraulic cylinder, bite. Elimination method: When installing the tilting furnace hydraulic cylinder, ensure that the axis position of the tilting furnace hydraulic cylinder is consistent with the direction of movement; Make the load borne by the tilting furnace hydraulic cylinder as far as possible through the tilting furnace hydraulic cylinder axis, to avoid the phenomenon of eccentricity.

When the tilting furnace hydraulic cylinder is installed, the piston and the tilting furnace hydraulic cylinder head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the tilting furnace hydraulic cylinder head boss is easy to cause scars when it hits the inner surface of the tilting furnace hydraulic cylinder wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized tilting furnace hydraulic cylinders, only careful and careful operation can be avoided.

Disassembly tilting furnace hydraulic cylinder: When disassembly tilting furnace hydraulic cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the tilting furnace hydraulic cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the tilting furnace hydraulic cylinder.

Answers to some questions about tilting furnace hydraulic cylinder:

Why does excavator cylinder oil leak?
Under normal circumstances, the leakage of hydraulic cylinders is divided into internal leakage and external leakage. The external leakage is generally due to damage to the oil seal at the extended end of the piston rod and needs to be replaced. Internal leakage is generally because the oil seal on the piston is damaged, you can try to replace the oil seal here, if the replacement will also leak, then check whether there is damage to the inner wall of the cylinder.

What is the thin cylinder used for?
The principle is no different from ordinary cylinders, that is, the installation space is small, the formation is small, and it is suitable for some special occasions. For example, the space is compact and the place of small travel is used.